Haas VF-5/40TR centro de mecanizado

This HAAS VF-5/40TR Vertical Machining center was manufactured in the year 2018 in the United States. It is equipped with a HAAS control unit and has 5 axis (removable 210 mm 2-axis thumb rotary table). The machine has a programmable Coolant Nozzle; a multi-position nozzle that automatically directs coolant precisely at the cutting tool. It has a spindle speed of 8100 rpm.
application type: Milling
Location: Bulgaria
machine type: Machining centers (vertical)
availability: Immediately
control unit brand: HAAS
GINDUMAC ID: BG-MIL-HAA-2018-00001
Spindle speed range: 8100 rpm 1/MIN
Number of axis: 5
X-AXIS Movement: 1270 MM
Y-AXIS Movement: 660 MM
Z-AXIS Movement: 635 MM
5-axis vertical machining center (1270 x 660 x 635 mm) with removable 210 mm
2-axis thumb rotary table- X-axis: 1. 270mm / y-axis: 660mm / z-axis: 635mm / a-axis: +-120° / b-axis: 360°- 40 cones- 30 hp (22. 4 kw) vector disc // 710 ipm (18. 0 m/min) rapids- Built-in direct drive vane- Wireless intuitive probing system: renishaw. Includes the haas visual programming system
macros
spindle orientation
and coordinate rotation and scaling.- Standard program memory: 1 gb of onboard memory for program storage and backup.- Chip auger: automatically removes chips from the machine
while compressing them and wringing out the coolant.- Haasconnect: remote monitoring of your haas machine. Requires the machine to be connected to the internet.- Ethernet interface: allows you to easily transfer files to and from the machine over a local wired network
Media display is used within an nc program to call up media files (images
videos
pdf files) from memory and display them on the control screen as the program runs.- High-speed machining
allows faster feedrates and more complex toolpaths
without hesitation or starving the machine.- Remote jog handle with extra-large touchscreen display
lets you to get up-close to the machine’s work area for part setup
changeover
and inspection
while still having control of the machine.- Rigid tapping
synchronized tapping
with built-in tap cycles.- Through-spindle coolant
300 psi (21 bar). Provides high-pressure coolant directly through the cutting tool. Requires 3-phase power. Note: tsc cannot be installed in the field unless the tsc-ready option is ordered with the machine.- Through-tool air blast
supplies high-pressure / high-flow air through the tool
directly to the cutting edge. Available for inline spindles
and 50-taper mills. Requires a haas through-spindle coolant system
or the tsc ready option.- Auxiliary coolant filter system
a bag-style filtration system that keeps the coolant free of particulates down to 25 microns. Note: if high-pressure flood coolant (high pressure cool) is installed
do not connect the auxiliary coolant filter (acf) directly to the high-pressure flood coolant pump. To use the auxiliary coolant filter with high-pressure flood coolant
the filter must be connected through an optional through-spindle coolant (tsc) system.- Programmable coolant nozzle
a multi-position nozzle that automatically directs coolant precisely at the cutting tool.- Dwo/tcpc- Machine other options: acf/tab /tsc/wips-r/rtap-3