Palmary GU32x100S Cylindrical Grinder 2022 rectificadora universal

This Palmary cylindrical grinder has barely worked. Palmary built it in April 2022 and the counter shows ten hours. Mechanically it matches a machine leaving the factory today, and the original tooling package comes with it — most of it still in its packaging.
Why ten operating hours matters
On a grinder this beats every other specification. The ways show no wear and the spindle bearings have not run in. Table geometry still holds its factory setting, because years of thermal cycling have not shifted it. Every accuracy figure Palmary published therefore still applies.
Compare that with a ten-year-old grinder at half the price. You save half the money, but you do not get half the machine — you inherit an unknown. Before you quote precision work on it, you first have to prove what it holds. That takes time, a test piece, and sometimes a hard lesson.
Capacity, precision and equipment
The machine takes 1,000 mm between centres, with 320 mm swing over the table and a maximum grinding diameter of 280 mm. Between centres it carries workpieces up to 100 kg. That covers shaft, spindle and roller work across the range most toolrooms and subcontractors see. The wheel head swivels ± 30° and the table 0–7°, so taper work goes straight on the machine.
Infeed resolves to 0.001 mm and each handwheel division reads 0.005 mm. A Mitutoyo KA-200 readout puts position on screen instead of leaving it to dial turns. Table traverse runs from 50 to 4,000 mm/min and the workhead turns from 10 to 300 rpm, infinitely variable — a combination built for finishing work with a specified tolerance and surface finish.
The package includes the Palmary PFA-80 coolant filtration unit, also 2022, rated at 80 L/min. Tooling covers a wheel balancing stand, dressing tools, spare wheels and flanges, workholding and a spare workhead spindle. The machine carries CE marking. You need no shopping list after delivery, and no accessory order holds up your first job.
Price, availability and inspection
A new machine in this class costs considerably more, with lead times running to months. Here you wait for a transport booking. The asking price is € 70,000 ex works, excluding VAT. The machine stands in the Netherlands and we can release it immediately.
Come and see it under power by appointment, and bring your own test piece. With this age and hour count we actively encourage that — prove the machine before you buy it.
Tell us what you need to grind: diameter, length, material and tolerance. We answer within one working day, and if the GU32x100S does not suit your work we say so plainly. You can also call or whatsapp.
Terms

We provide all specifications to the best of our knowledge. The buyer should verify them.
We offer the machine subject to prior sale and availability.
The price excludes dismantling, loading and transport unless we state otherwise.
Our partner network handles logistics and worldwide shipping on request.
We welcome inspection under power by appointment.


Make / model Palmary GU32x100S
Manufacturer Palmary Machinery Co. Ltd
Taichung
Taiwan
Year of manufacture April 2022
Machine number 3210242
Operating hours 10
Capacity
Distance between centres 1,000 mm
Swing over table 320 mm
Max. external grinding diameter 280 mm
Max. workpiece weight between centres 100 kg
Wheel head
Swivel angle ± 30°
Manual travel 160 mm
Automatic rapid advance 40 mm
Sliding seat supplementary travel 95 mm (295 mm total)
Minimum setting increment 0.001 mm
Handwheel graduation 0.005 mm per division
2 mm per revolution
Straight infeed range 0 – 0.35 mm
Grinding wheel Ø455 × 50 × Ø127 mm (PA80L 20A fitted)
Workhead
Spindle speed 10 – 300 rpm
infinitely variable
Centre taper MT4
Swivel range 120° (+90° / –30°)
Max. workpiece load on spindle 35 kg (max. length 150 mm)
tool holder included
Tailstock MT4 centre
25 mm quill stroke
Table
Swivel angle 0 – 7°
Traverse speed 50 – 4,000 mm/min
Equipment
Digital readout Mitutoyo KA-200 counter
Coolant system Palmary PFA-80 filtration unit
80 L/min
380 V / 3-phase
Accessories Full tooling package included — see list below
CE marking Present
Power supply 380 V / 3-phase / 50 Hz
Machine weight approx. 3,900 kg
Location Belgium
Availability Immediately